C-Series H-1 Power Pak

Power Storage IconPower Generation IconC-Series H-1 Power Pak

ITEMC100HR

C-Series H-1 Power PakOverview:

The C-Series (Custom Series) H-1 Power Pak was designed as a power storage device for law-enforcement applications.  It is constructed using the same ruggedized  features as its Mil-Series siblings, but without any solar power capability.  It requires traditional battery recharging practices (vehicle or AC battery charging).

 

Operation:

BMV 600 Power Management Display provides
- Battery voltage (V)
- Battery charge/discharge current (A)
- Amp-hours consumed (Ah)
- State of charge (%)
- Time-to-Go at the current rate of discharge
- Visual and audible alarm: over and under voltage, and/or             
  battery discharged
- Programmable alarms for battery voltage
- Current consumption: 1mA

Expandable:

If the Power Pak is used in an application where more power is required, capacity can be increased using “Plug & Play” connections to add Expander Paks (additional battery capacity) or “jump” in extra batteries using accessory cables (included).

Portable / D.O.T. Approvals:

NON-SPILLABLE LEAD ACID AGM BATTERY
D.O.T approved for Air, Sea & Land transport. Extending Aluminum Handle and Heavy Duty Wheels, easily transports by one person.

Construction:

Ruggedized for severe environmental conditions. The C-Series Power Pak 1000 can handle repeated severe impacts as well as extreme operating temperatures.

Field Serviceable:

Innovative in design, no routine maintenance is required on the C-Series H-1 Power Pak. 

The Pak is “field serviceable” using simple tools.  Batteries can be easily and quickly replaced at the end of their service life.

Warranty:  

3 year “materials and workmanship”

Includes: 

Portable pure-sine inverter rated for 180W (CLA connector)
4 ft, 6 AWG interconnect cable with SB175 Yellow connectors
10 ft cargo tie down strap

Pelican Case Colors

Price Range $3,200 - $6,250 **
**Special pricing for military, federal, state, and local government agencies. Please contact us for more information.

Features

Pelican™ 1440 Case
Rigid Spring lid support to protect against accidental closing
Victron BMV 600  Battery Monitor/Information Management System
Twin 12 volt AGM internal batteries
 90 Amp-hour reserve capacity (1.0 kW-h)
Bussmann 100A Panel Mount Master Circuit Breaker Switch

Connectors and circuit breakers accessible on interior panel:

• 4 Blue Seas CLA with Tyco 20 amp Panel Mount circuit breakers
• 1 SB50 Gray with Tyco 30 amp Panel Mount circuit breaker
• 1 SB50 Red with E-T-A 50 amp Panel Mount circuit breaker
• 1 SB175 Gray - metered port for connection of load or charging source
• 1 SB175 Yellow - un-metered port for connection of additional battery or Pak

Engraved text on all surfaces identifying each connector, control and switch, providing critical instructions and warnings
“Battery Replacement Date” Placard in interior panel
Exterior markings indicating total weight and “two man lift”
Each Pak individually serial numbered
Operational temperature: 0°C to +60 °C (+32 °F to +140 °F)
Storage temperatures: -20°C to +70 °C (-4 °F to +158 °F)
Impact resistant - survives 36 inch drop on any side

Warranty

3 year “materials and workmanship”

Weight & Dimensions

Weight 99 lb (44.9 kg)
Dimensions 19.70” x 12” x 18” (50 x 30.5 x 45.7 cm)

 

AGM Battery Information

Lead Acid Battery

D.O.T. approved as non-hazadous cargo for ground, sea, and air transport

DOT 49CFR173.159(d) (i) and (ii)

Flame retardant (UL 94 VO) PC-ABS plastic case and cover

UL approved

Recommended C-Series Power Pak Accessories:

Replacement Battery Kits
Charging Kits
Service Cables