Pro-Series Power Pak 100

Pro-Series Power Pak 100

12V DC Item # 000712

Overview:

The Flagship of our 12VDC Pro-Series Power Paks!

The Pro-Series Power Pak 100 allows the Solar Stik™ to operate as a stand-alone power generator in any application where a portable gasoline generator would be used.  It is a highly mobile and functional platform that provides 12V DC, 120V AC power (through an inverter) for a wide variety of applications specific to the EOC, and other civilian or government applications.

 

Operation:

“Plug & Play” operation. Power is available from case whether open and/or closed.  The Power Pak 100 stores up to 1 kW-h of energy and provides 12V DC Power through FOUR Cigarette Lighter Adapter (CLA) receptacles, Post Terminals or from a programmable 12V DC Auxiliary Circuit that has a Cannon connection on the exterior of the Pak (custom cable required).   AC Power is available through the unit’s 180W Pure Sine Wave Inverter.

“User friendly” controls including a bright, crisp backlit Liquid Crystal Display (LCD) with plain English language text and three simple front panel keys. The menu system is extremely intuitive and easy to use and provides a highly accurate calculation of battery State of Charge (SOC), compensates for a variety of factors including charge/discharge current, battery size, type, temperature and how the battery was brought back to full charge. It even learns from past battery behavior to continuously improve accuracy!

NEW exclusive LED battery “SOC Meter” allows for quick access to battery status with the touch of a finger.  Bright color LED indicators range from RED / YELLOW / GREEN in accordance with battery Voltage. 

Operate all day from Solar Stik™ generated energy and all night from the Power Pak’s 1 kW-h energy reserve.  

The Power Pak provides an open architecture that allows recharging using conventional methods, enabling greater mobility and versatility in the field. This is a critical feature as it allows the Power Pak to operate independently of the Solar Stik™ System when conditions warrant.  

    BATTERY-ONLY MODE:  The Power Pak can also be used as an independent power supply. Power is available from the Pak even when no charging source is connected.

    GENERATOR MODE: If a charging source is available (such as a Solar Stik™, Flexible Solar Panels, Wind, Vehicle, or any other 12V DC charging source), the Power Pak can simultaneously be charged and provide power to connected appliances.

“Remote Monitoring Kit” (RMK) Ready

The Power Pak is pre-wired with a network circuit that allows the operator to install a Universal Communication Module (UCM).  The UCM is installed to the Power Pak control and establishes communications through internet protocols, allowing the operator full access to the DC circuit’s programming and controls from anywhere there is an internet connection.  

The Power Pak has an external weatherproof ethernet port for connection of a modem-device (such as a satcom system), or the UCM can be connected to the internet using a wireless access device (such as a cell phone data modem).   See more about the RMK by clicking here.

Expandable:

If the Power Pak is used in an application where more power is required, capacity can be increased using “Plug & Play” connections to add Expander Paks (additional battery capacity) or “jump” in extra batteries using accessory cables (included).

Multiple Solar Stiks™ can also be “daisy chained” together to supply the Power Pak(s).  The Pro-Series Power Pak 100 can process up to 25A (300W) of incoming PV Power, allowing the operator to scale the entire system in accordance with the requirement.

Portable / D.O.T. Approvals:

NON-SPILLABLE LEAD ACID AGM BATTERY
D.O.T approved for Air, Sea & Land transport. Extending Aluminum Handle and Heavy Duty Wheels, easily transports by one person.

Construction:

Ruggedized for severe environmental conditions. The Pro-Series Power Pak 100 can handle repeated severe impacts as well as extreme operating temperatures.

Field Serviceable:

Innovative in design, no routine maintenance is required on the Pro-Series Power Pak 100.   A 2-Watt solar panel mounted on Pelican™ case exterior keeps the batteries de-sulfated and charged during periods of inactivity.

NEW - All Power Paks now have exclusive LED battery “Cycle” counters for easy access to battery cycle-count information.  The Cycle meter allows for battery replacement at pre-determined intervals, ensuring continuity of operation and less battery failures in critical applications.

The Pak is “field serviceable” using simple tools.  Batteries can be easily and quickly replaced at the end of their service life.

Warranty:  

3 year “materials and workmanship”

Includes: 

Two 5’ 4AWG Accessory Cables (Red & Black for 12VDC) with ring terminal ends

5’ Double-ended CLA 12V Plug

Additional “Solar Only” plug

Available Accessories:

Custom Cables for connecting load to AUX circuit

Remote Monitoring Kit (RMK)

Rainguard

Omni Cable Pak

Price Range $3,200 - $6,250 **
**Special pricing for military, federal, state, and local government agencies. Please contact us for more information.